IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー

IMA AVM/K/I/G80/822/S3R3L20
リクエストに応じた価格
販売会社に連絡
私に電話をかけ直す
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 1 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 2 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 3 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 4 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 5 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 6 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 7 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 8 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 9 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 10 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 11 - Machineryline
IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー | 画像 12 - Machineryline
広告に興味はありますか?
追加の写真をリクエストする
1/12
価格:
リクエストに応じて
価格が変更されたら知らせてください
ブランド: IMA
モデル: AVM/K/I/G80/822/S3R3L20
製造年: 2003
場所: ドイツ Kaiserslauternそこから6808 km
販売会社在庫ID: DE-EDG-IMA-2003-00001
掲載日: 2026/10/23
状態
状態: 使用済

さらに詳細 — IMA AVM/K/I/G80/822/S3R3L20 エッジバンダー

英語
Edgebander manufactured in 2003. This IMA AVM/K/I/G80/822/S3R3L20 is designed for milling, edge banding, and postproduction for rebate doors. It features a heavy machine base, a drive for feed speed of approximately 5-25 m/min, and a glue application unit for various edge materials. If you are looking to get high-quality edge banding capabilities, consider the IMA AVM/K/I/G80/822/S3R3L20 machine we have for sale. Contact us for further details regarding this machine.
Location: DE
throughfeed: door top side (cross processing)
Vertical edge: approx. 70 mm
Rebate glueing: approx. 60 mm
Strips: up to 1,3 mm
Coil material: 0,4-3 mm
Solid wood strips: 6 mm
Strip length max: 2550 mm
Strip height: 14-80 mm (depending on glue application)
Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is not binding
Spindle motor power
1 pre-milling unit with 2 motors
each 3 kW
1 milling unit with 2 motors
1 kW
1 milling unit with 2 motors
660 W
Spindle speed range
12.000 rpm
Heating capacity
5,0 kW
Used single-sided rebate and edge-banding machine
For milling
edge banding and postproduction for a rebate - only on formated / pre-rabbet doors and unrebate doors
Left machine (fix stop on the left side)
Total processing in 3 throughfeeds
throughfeed: door long side
throughfeed: door long side
During 2. and 3. throughfeed the edge projection from 1. throughfeed is beeing milled by normal-reverse milling
The double rebate glueing is only possible by readjustment of the machine and manual postprocessing of the edge
Max. door thickness
Heavy machine base as carrier for units
Drive for feed speed of approx. 5-25 m/min
mechanical stepless adjustable
Transport chain with plastic plates
approx. 80 mm wide
with automatic central lubrication
Manually height-adjustable top pressure with v-belt 80 mm wide
Infeed table
1 horizontal manually adjustable unheated infeed fence
1 pre-milling unit controllable
not swivable
not tracing
Glueing unit for optional use of straight edges or softforming
by change of glue application device
Edge material
Manual side adjustment for pneumatic moveable glue application
Manual height adjustment from -15 mm up to +10 mm
1 glue application 0,8 L
max. edge height 70 mm
straight edge with pneumatic quick lock
Chem-Coat
electronic temperature control
1 hot melt glue application 0,8 L with quick-lock
edge height max. 80 mm
soft edge
Chem-Coat
with temperature control and control unit for strips
1 automatic Quickmelt hot melt glue application
1 2-fold magazine for edge material up to 3,0 mm thickness
manually mountable on the single coil magazine
1 rebate shape pressure zone for pressing of edge material to a rebate with
an activation unit 15 kW for reactivation of the edge material for rebate-shaping
a pneumatic controlled shaping tool for the bottom fold edge
a pneumatic controlled shaping tool for the complete rebate
additional pressure rollers for the edge areas with rebate
an electropneumatic side-moving device for the complete pressure zone
1 horizontal adjustment with mechanical digital readout
1 trimming unit for 2 motors mounted on top pressure for trimming of the front and rear edge/strip projection for trimming flush or with chamfer
1 milling unit for 2 motors with height tracing
side tracing
for flush milling from bottom and top
30° swivable
1 milling unit for 2 motors with height tracing
side tracing
for fine milling from bottom and top
30° swivable
コメントをすべて表示する
追加情報をリクエストする
重要
販売者からの説明があります。すべての詳細内容については販売者にご確認ください。
購入に関するアドバイス
安全に関するヒント
販売者の認証

機材を低価格で購入する判断をした場合、あなたが本当のリバイバルガンダム

価格のチェック

購入を決める前に、いくつかのセールスオファーを慎重にレビューして、選んだ装置の平均費用を知ってください。そのオファーの価格が同様のオファーよりも極めて低い場合、疑ってください。著しい価格差は欠陥が隠れている可能性や販売者が詐欺的行為を行なおうとしている可能性を示します。

類似する装置の平均価格と著しく異なる価格の製品は購入しないでください。

怪しい誓約に同意したり、商品に対して前払いをしないでください。疑念がある場合、躊躇せずに詳細について明確にし、その装置の追加の写真や文書を請求し、文書の正統性を確認して、質問してください。

疑わしい前払い

最も一般的な詐欺の手口です。アンフェアな販売業者は、装置を購入するあなたの権利を「予約」するために一定金額を前払いすることを要求することがあります。詐欺師はこのようにして大きな金額を集め、姿をくらまし、連絡できなくなってしまいます。

この詐欺の変種には次に示すものが含まれることがあります。
  • 前払いのカードへの送金
  • やり取りにおいて販売者に疑念がある場合、書面により送金プロセスを確認することなく前払いしないでください。
  • 「受託人」口座へ送金
  • こういった要求は危険です。おそらくは詐欺師とやり取りしていると思われます。
  • 類似する名前の会社アカウントへの送金
  • 詐欺師は名前をほんの少しだけ変えることで自らを有名企業と偽ることがあるので注意が必要です。会社名に疑念がある場合は、資金送金をしないでください。
  • 実際の会社の請求書の詳細を入れ替える
  • 送金する前に、指定された詳細事項が正しく、それらが指定された会社に関連するものであるかを確認してください。
不正がありましたか?
当社までご連絡ください。
安全に関するヒント
類似する広告
リクエストに応じた価格
エッジバンダー
2005
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2005
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2005
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
このセクションからの新しい広告を受け取る申込をする
エッジバンダー IMA 製造年: 自 2000 至 2006
ここをクリックすると当社のプライバシーポリシーおよびユーザー合意に同意したことになります。
リクエストに応じた価格
エッジバンダー
2009
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2009
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
Brandt KDF 560 エッジバンダー Brandt KDF 560 エッジバンダー
2
リクエストに応じた価格
エッジバンダー
2004
CNC ✓ 設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2005
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
両面エッジバンダー
2010
パワー 22 kW
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2010
19,714 m/h
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2010
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
両面エッジバンダー
1996
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2000
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2008
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2001
CNC ✓ 設置タイプ 床置き
ドイツ, Gräfelfing
UCY Industrial GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2008
設置タイプ 床置き 最大ワーク厚さ 60 mm エッジ厚さ 20 mm 送り速度 20 m/min
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2008
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
Hebrock Euro 2000 エッジバンダー Hebrock Euro 2000 エッジバンダー
2
¥1,503,000 €8,500 ≈ $9,394
エッジバンダー
2000
設置タイプ 可動式 エッジ厚さ 8 mm 送り速度 11 m/min パワー 11 kW 電圧 230/400
ドイツ, Weißenfels
GUTINVEST INTERNATIONAL ASSETS S.L,
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2009
設置タイプ 床置き
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2016
17.67 HP (12.99 kW)
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡
リクエストに応じた価格
エッジバンダー
2017
エッジ厚さ 6 mm 送り速度 11 m/min
ドイツ, Kaiserslautern
GINDUMAC GmbH
販売会社に連絡