新しいTyreON TSC3500X2s full rise scissorlift car - hydraulic mechanical loc シザーカーリフト

The price is excluding VAT and delivery costs.
Capacity 3500 kg - On floor
Lifting height 10,5 - 198 cm
Platform length 148,5 - 210,5 cm
Drive 2.2 kW Electric-hydraulic
Type Fully automatic
► Hydraulic mechanical safety lock
► No air - immediate descent
► Auto-stop at 30 cm + slow descend
► IR synchronization monitoring
► Own weight 950 kg
► Quick and easy to install
► Broken hose protection
Including Floor bolts
A coded hydraulic hose set
Package L220 x W75 x H85 cm - 1045 kg
Voltage 400V or 230V

The internal hydraulic mechanical locks are making compressed air unnecessary and the immediate descent as the down button is pressed possible.
Full rise scissorlift for short to extra-long passenger cars, delivery vans, light commercial vehicles and busses.
Low profile of just 10.5 cm for sportcars.Simple to use and maintain and ideal for limited space.

With four powerful hydraulic cylinders and a tip-lever lifting system for lifting with full force from the lowest point.
Safe double scissor lift, solid construction, for professional use. Fully automatic lifting and lowering at the touch of a button.
The car lift stops immediately at a 15 mm height difference between the two platforms or if a person walks between the platforms during lifting or lowering..
TyreON TSC3500X2s
Professional full rise scissorlift - Fully automatic
Double scissor lift with all conceivable options
Controller with hydraulic pump unit
The ramps can be fixed horizontally for long vehicles up to 3.5T
Easy access due to the 66 cm wide platforms and ramps with anti-slip profile
Also suitable for low ground clearance vehicles
Significant 198 cm lifting height
Comes standard with 4 rubber lifting blocks
Variably positionable 24V all-in-one controller
Lots of space btween lifting tables, up to 90 cm
Tip-lever-lifting system and 2 powerful hydraulic cylinders per platform
Solid steel scissors
Auto-stop at 30 cm height
Acoustic and optical warning signal when descending from 30 cm
Lifting platforms - hydraulically synchronized - up and down simultaneously (Master-Slave cylinder follow principle)
Electronic synchronization monitoring by means of a IR photocell
Height switch - stops the hydraulic pump unit when the car lift reaches the highest point
Central check valve - prevents the lift from dropping in the event of oil pressure failure
Pressure relief valve - prevents damage to the car lift when overloaded
Procedure for lowering in the event of a power failure
Suppluied with installation material, hydraulic hose set and floor cover channels
Full rise scissorlift - Floor mounted
This flat full rise scissorlift is bolted to the floorsurface and connected to the controller.
This neatly finished double scissor lift has a long technical life due to the applied process techniques, careful assembly and the use of first-class materials.
Full rise scissor lift car - Professional heavy duty version
The hydraulic working pressure (upward force) and the lowering speed can be adjusted
Reinforcement profiles on the inner sides of the lifting tables
Protective caps on the lifting cylinders
Lifting platforms and ramps made of thick sheet steel
Finished with powder coating
On-off main switch with indicator light on control panel
Floor requirement 15 cm concrete
Easy venting of the hydraulic system and leveling of the scissor lift tables during installation
TyreON TSC3500X2s full rise scissor lift car
Technical details  full rise scissor car lift         
Lifting capacity 3500 kg    
Maximum lifting height 198  (194 without rubber blocks) cm    
Initial drive on height 10,5 cm    
Time lifting / lowering 40 / 30 sec    
Platform length 148,5 - 210,5  (ramps up) cm  
Width platforms 66 cm    
Space between the lift platforms Up to 90 cm (with the supplied hose set)      
Distance carlift controller (maximum) 250  cm    
Other information        
Type Electric - Hydraulic      
Engine power 2,2 kW    
Hydraulic working pressure 28 / 280 Mpa / Bar    
Voltage (50Hz) 230/1Ph  or  400/3Ph Volt    
Fuse amperage  16  or  20  Ampere    
Noiselevel car lift dB    
Dimensions controller  L32 x-W29 x H107 - cm      
Delivery of the full rise scissor car lift
The full rise car scissor lift and the controller are tested for all functions and packed together with:
 
The installation and operating manual
Set of floor bolts (16 mm x 140 mm)
A coded hydraulic 400 bar hose set + accessories
Set of protective floor cover channels for the hoses
2 lifting cylinder covers
4 rubber lifting blocks, height 4 cm
Hydraulic oil is not included - 15 liters HV-ISO-32 can be ordered along
TSC3500X2s full rise scissorlift car - hydraulic mechanical lock - extra wide and long lifting tables - completely graphite gray