新しいCaterpillar CG170-20 2MW ガス発電機
広告に興味はありますか？
1/2
ブランド:
Caterpillar
モデル:
CG170-20 2MW
タイプ:
ガス発電機
製造年:
2018-04
場所:
オーストリア
Hörsching7279 km to "United States/Columbus"
Hörsching7279 km to "United States/Columbus"
販売会社在庫ID:
CG170-20
掲載日:
1か月超
エンジン
パワー:
2200 HP (1617 kW)
燃料:
ガス
気筒数:
2
状態
状態:
新しい
重要
このオファーはガイダンスだけを目的とするものです。販売会社により詳細な情報をリクエストしてください。
購入に関するアドバイス
安全に関するヒント
販売者の認証
機材を低価格で購入する判断をした場合、あなたが本当のリバイバルガンダム
価格のチェック
購入を決める前に、いくつかのセールスオファーを慎重にレビューして、選んだ装置の平均費用を知ってください。そのオファーの価格が同様のオファーよりも極めて低い場合、疑ってください。著しい価格差は欠陥が隠れている可能性や販売者が詐欺的行為を行なおうとしている可能性を示します。
類似する装置の平均価格と著しく異なる価格の製品は購入しないでください。
怪しい誓約に同意したり、商品に対して前払いをしないでください。疑念がある場合、躊躇せずに詳細について明確にし、その装置の追加の写真や文書を請求し、文書の正統性を確認して、質問してください。
疑わしい前払い
最も一般的な詐欺の手口です。アンフェアな販売業者は、装置を購入するあなたの権利を「予約」するために一定金額を前払いすることを要求することがあります。詐欺師はこのようにして大きな金額を集め、姿をくらまし、連絡できなくなってしまいます。
この詐欺の変種には次に示すものが含まれることがあります。
- 前払いのカードへの送金
- やり取りにおいて販売者に疑念がある場合、書面により送金プロセスを確認することなく前払いしないでください。
- 「受託人」口座へ送金
- こういった要求は危険です。おそらくは詐欺師とやり取りしていると思われます。
- 類似する名前の会社アカウントへの送金
- 詐欺師は名前をほんの少しだけ変えることで自らを有名企業と偽ることがあるので注意が必要です。会社名に疑念がある場合は、資金送金をしないでください。
- 実際の会社の請求書の詳細を入れ替える
- 送金する前に、指定された詳細事項が正しく、それらが指定された会社に関連するものであるかを確認してください。
不正がありましたか？
当社までご連絡ください。
販売会社の連絡先
ETC EUROPE TRUCK FINLAND OY
オーストリア
Machinerylineで9年
+358 50 53...
表示
+358 50 5345498
+358 9 231...
表示
+358 9 23165797
機械や車両を販売しますか？
あなたは私たちと一緒にすることができます！
類似する広告
リクエストに応じた価格
2017
21 m/h
現在の周波数
50 Hz
50 Hz
オーストリア, Hörsching
ETC EUROPE TRUCK FINLAND OY
Machinerylineで9年
1
リクエストに応じた価格
2020
現在の周波数
50 Hz
50 Hz
オーストリア, Hörsching
ETC EUROPE TRUCK FINLAND OY
Machinerylineで9年
3
リクエストに応じた価格
2019
現在の周波数
50 Hz
50 Hz
オーストリア, Hörsching
ETC EUROPE TRUCK FINLAND OY
Machinerylineで9年
3
リクエストに応じた価格
2012
19,000 m/h
オーストリア, Hörsching
ETC EUROPE TRUCK FINLAND OY
Machinerylineで9年
リクエストに応じた価格
2010
オーストリア, Hörsching
ETC EUROPE TRUCK FINLAND OY
Machinerylineで9年
€65,000
≈ $75,760
≈ ￥11,170,000
2018
ポルトガル, Seixal
Ambigroup Reuse
Machinerylineで2年
リクエストに応じた価格
1997
ベルギー, Hamont
Hamofa Industrial Engines
Machinerylineで16年
リクエストに応じた価格
1995
ベルギー, Hamont
Hamofa Industrial Engines
Machinerylineで16年
リクエストに応じた価格
2009
16,000 m/h
オーストリア, Hörsching
ETC EUROPE TRUCK FINLAND OY
Machinerylineで9年
2
リクエストに応じた価格
2020
現在の周波数
60 Hz
60 Hz
ベルギー, Waregem
Flanders Surplus nv
Machinerylineで5年
€32,000
≈ $37,300
≈ ￥5,497,000
2021
現在の周波数
50 Hz
50 Hz
ドイツ, Bergisch-Gladbach
Stromerzeuger-Discount.com
Machinerylineで2年
€135,000
≈ $157,400
≈ ￥23,190,000
2011
7,579 m/h
現在の周波数
50 Hz
50 Hz
ドイツ, Bergisch-Gladbach
Stromerzeuger-Discount.com
Machinerylineで2年
リクエストに応じた価格
2008
42,336 m/h
現在の周波数
50 Hz
50 Hz
フランス, Villeparisis
GROUPE MMO
Machinerylineで2年
リクエストに応じた価格
80,000 m/h
オランダ, Moerdijk
Diesel Power Holland
Machinerylineで7年
リクエストに応じた価格
1995
ベルギー, Hamont
Hamofa Industrial Engines
Machinerylineで16年
€46,000
≈ $53,620
≈ ￥7,901,000
2012
60,100 m/h
現在の周波数
50 Hz
50 Hz
ドイツ, Bergisch-Gladbach
Stromerzeuger-Discount.com
Machinerylineで2年
リクエストに応じた価格
1995
ベルギー, Hamont
Hamofa Industrial Engines
Machinerylineで16年
ガス発電機 スペア部品
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation
Available for sale. New 2000kW New unused Caterpillar CG170-20 Natural Gas Industrial Generator Sets. Rated at 2000 kw, 50 Hz, 10500 V / 400V ,500 RPM. Year 2018, 0 hours since new. CAT warranty.
Ready to dispatch from the stock. Contact us details.
Газопоршневая электростанция CAT CG170-20 натуральный газ. Новые без наработки. Наличие на складе .
----
Genset Base engine-
Base engine CG170-20 50Hz Base alternator
Standard alternator n = 1,500 / min Base genset
Base genset Natural gas 50Hz, MV, Marelli Exhaust gas outlet
Exhaust manifold with Exhaust waste gate, manifold 90° vertical Preservation
Standard conservation (24 months)
Exhaust turbo charger
Exhaust turbo charger Base frame
Base frame with oil tank, 230/400 V pre-lubrication Combustion air filter and preheating
without preheating CG 170 -20
Suction and Cooling system (biogas applications and tropical conditions) Paint job
Primer, top coat and spare paint: Cat-yellow EATY008 Name plate
name plate in English Crankcase ventilation
Crankcase ventilation / UPF 105 Exhaust pressure monitor
Exhaust back pressure sensor
Spare parts for commisioning
Spare parts for comissioning CAT TEM system Base system TEM
Specification -
Remark
Quantity Description
Base system (CST170F20-F) Frequently chosen options TEM
Heat utilization with heating circuit (HK)
Dump cooling and exhaust bypass control (NK/BY)
Radiator controler (TKS1)
3 CH4 compensation for mutable CH4 concentration, extention package for CH4 ompensation
Modbus RTU (MRTU) 3 Demand of external starting preparations (AES) Visualisation TEM
Operating terminal (BRT-C)
TEM control cabinet, packaging, cables
Console (KBW)
TEM connecting cable set CG 170K/170 15m (K20ARM15) Plant components Batteries
Starter battery in quadruple storage box Zero-pressure gas control train
Gas train DN 150/150/150 (RMG) 3 Non-standard zero-pressure gas train -3 Non-standard zero-pressure gas train Intercooling circuit sensors
Counter flange DN 65 3 Safety valve 3 bar 3 Differential pressure switch 3 Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 65/ PN16, 230 V Engine cooling circuit sensors
Safety valve 3 bar
Differential pressure switch 3 Water low level switch 3 Ventilation valve 3 Electric preheating 9 kW Heating circuit sensors
Remark
Quantity Description
Differential pressure switch 9 Temperature sensor PT 100 Back-up cooling circuit sensors
Counter flange DN 100
Temperature sensor PT 100 3 Water low level switch 3 Ventilation valve 3 Three-way valve DN 100/ PN16, 230 V Cooling water pumps intercooling circuit
Counter flange DN 50 Coolant pump DN 50 Etaline 連絡先を表示/133 Cooling water pumps engine cooling circuit
Counter flange DN 65 Counter flange set DN 65 Throttle valve DN 65
Coolant pump DN 65 Etaline 065-065-160/162 Expansion vessels intercooling circuit
Expansion vessel 250l
Lock-off valve for expansion tank
Expansion tank manometer Manometer cut-off valve Expansion vessels engine cooling circuit
Expansion vessel 400l Lock-off valve for expansion tank 3 Expansion tank manometer Manometer cut-off valve Services Final inspection
engine test without customer participation Packing
Seaworthy packing for genset: wooden pallet and foil cover 1 packing plant components Standard documentation
Standard documentation (2 copies) incl. preparation