Comacchio GEO 205 掘削リグ

price: Price on request
Machine location: Europe
1st section: Rotary head rotation- tracks and Fast feed
2nd section: Percussion
3rd section: Water / flush pump
4th section: Auxiliary and feed – retract
Nominal Feed force: 2.500 daN
Nominal Retract force: 2.500 daN
Feed stroke: 2.430 mm
Total feed length: 3.660 mm
Gear change system: mechanical
A2FM 32 Motor with 4: 1 Gear Reduction
Output Torque: 4 daNm (40 Nm)
Maximum Continuous Speed: 345 rpm
Maximum Peak Speed: 580 rpm
Clamping force: 180 Bar - 130 KN
Breaking torque: 1.500 daN*m
Clamping range: 45-220 mm only in combination with rotary head R350/R400
Hydraulic setting for the operation of the GAMMA pump, operated by an hydraulic motor: Max delivery 85 Lt/min – Max pressure 60 bar
Geotechnical drilling rig with 10 idling working hours
Never used
Tracked undercarriage
Chassis
Hydraulic power pack
Made with a square section steel tube in steel type S275JR EN 10027-1
complete with
Two hydraulic jacks fixed on the rear side
Two hydraulic jacks on the front side mounted on pivoting arm
Mast raise cylinder
Mast slide cylinder stroke 700 mm
Rotary head carriage
Rotation unit
Hydraulic power pack
Fluid line
Line of 1” suitable for max operating pressure of 88 bar
Controls
Diesel engine ignition and protection panel
Fixed control panel including the set-up functions
Fixed control panel including the drilling function
Remote electric proportional console for tracks
Documentation
2 copies of Spare Parts manuals
2 copies of Use and Maintenance manuals
hydraulic schematic and electrical diagrams
2 CDs including the complete technical file
engine documentation and accessories documentation
CE certified
Manufactured in compliance with EN 16228-1 and EN 16228-2 including
Safety devices and warning labels on the machine
Safety protection cage on the mast with interlocking system
Restricted Operating Mode system (ROM)
Identification plate with CE marking
CE Conformity Declaration
The safety cage dimensions can vary according to the machine configuration and may exceed the undercarriage and/or machine body width
Hydraulic power pack
Located on the rear side of the machine
it consists of the following main components
Diesel engine KUBOTA V1505-T-E3B
4-cylinder Turbocharged water cooler
Displacement 1,498 Lt
Power 33 Kw (44 HP) at 3000 rpm
Exhaust emissions according to 97/68/EC Step 3A – EPA Non Road Tier 4 Interim
Electric circuit 12V
Quadruple gear pump
20 um filter mounted on the return line
Oil cooler combinate with the engine cooler
130 Lt. capacity hydraulic oil tank
30 Lt. Capacity fuel tank
Oil level and temperature indicator
Fuel level indicator
Fix width undercarriage
Rubber type
operated by two planetary moto reducer complete with negative brake and motion control valve
Max. climbing ability 36 %
Max. speed 1,3 Km/h
Track wheel base 1.380 mm
Undercarriage width 1.100 mm
Pad width 230 mm
Mast in a single element
made with a rectangular section steel tube in steel type S355JR EN 10027-1 with the slide rails in hard steel type C45 EN 10083-1 draft
Feeding system by hydraulic moto reducer and single roller chain
Rotary head carriage with hydraulic off-hole slidramatic
Made in welded steel plate in steel type S275JR EN 10027-1 complete with
2 guiding sliding blocks and four vertical rollers
4 eccentric rollers vertically orientated
Hydraulic off-hole slidramatic via an hydraulic cylinder (Mounting plate excluded)
Mounting plate for rotary head carriage with ‘slidramatic’
Mounting plate for rotary head R350
Rotary head R350
Consisting of a two-speed gear change box operated by a two speed planetary gear reducer and an axial pistons hydraulic motor
Floating spindle kit for R350
Floating spindle kit (rubber type shock absorber) with thread connection 2” 3/8 API
REG female and connection for injection swivel CTA 10
1”
Air-water swivel (Top mounted)
Type CTA 10 – Connection 1” BSP
Hydraulic rod holder and combined rod breaker
Valve for clamping force regulation
1000 kg hydraulic winch (including crown block
rope L. 20 mt and hook)
Max. line pull 1.000 kg
rope capacity 48 mt
rope speed 40 mt/min
rope diameter 8 mm
Foam/water pump GAMMA 85